Assign a static that matches your local network subnet (e.g., 192.168.1.201 ).
(functions.RelatedSearchTerms)
: Change the default IP address ( 192.168.1.201 ) to match your local network subnet.
To avoid common issues with your ZKteco UA300 device, follow these best practices:
If the device is connected to your local network, you can trigger a factory reset remotely using the attendance management software (ZKTime.Net, ZKTime 5.0, or BioTime). Step 1: Connect to the Device Open your ZKTeco software on your PC. Go to the or Terminal management section.
A factory reset is a powerful tool, but frequent resets are a sign of underlying issues. Implement these best practices to avoid needing to reset your ZKTeco UA300 again:
If you know the administrator password or have an authorized admin fingerprint, you can perform a soft reset directly from the interface. Press the key to open the main menu.
IP addresses, gateway settings, and Wi-Fi configurations are wiped.
No. In 99% of cases, you can reset directly from the touch screen or boot menu.
It is crucial to understand what a factory reset does—and does not—do on the UA300. The reset operation typically restores the device's system parameters—including communication settings, IP address, network configuration, and system password—to their original factory defaults. Importantly, a standard system reset usually clear registered user data or attendance logs. The specific scope of the reset can vary depending on the exact model and firmware version.
