Sscom 5.13.1 English [extra — Quality]

Features an Auto-Send Mode for repetitive testing and the ability to store scripted commands for rapid deployment.

Any data sent by your microcontroller will automatically stream into the large black display box. Check HEX Show if you want to see raw bytes.

Serial Debug Assistant - Free download and install on Windows Sscom 5.13.1 English

Set your Baud Rate (usually 9600 or 115200), Data Bits (8), Stop Bits (1), and Parity (None).

A: No, SSCOM is designed specifically for Windows operating systems. For macOS or Linux, consider alternatives like COMTool or minicom. Features an Auto-Send Mode for repetitive testing and

One of the standout features of version 5.13.1 is the side panel of customizable buttons. You can pre-program up to 100 strings or commands. This is a lifesaver when you need to send repetitive AT commands to a GSM or Wi-Fi module. 5. Data Logging

SSCOM 5.13.1 automatically detects active COM slots on Windows machines. It provides industry-standard preset baud rates (such as 9600, 115200) and supports customized non-standard baud rates needed for specialty microcontrollers. 4. Automation & String Sequential Playback Serial Debug Assistant - Free download and install

If you see random noise, verify that your baud rate, parity bits, and stop bits match your hardware's specifications.

SSCOM 5.13.1 English: The Ultimate Guide to Serial Port Debugging

A: SSCOM can communicate with Bluetooth modules that present as virtual COM ports (common with HC-05, HC-06, and similar Bluetooth-to-serial adapters).