Working near lead-acid batteries involves dangerous explosive gases. Always complete these prep steps:
By following these instructions and taking the necessary precautions, you'll be able to get the most out of your Selmarturbo 4 Battery Charger and enjoy reliable, efficient battery charging for years to come.
Before you start using your Selmarturbo 4 battery charger, make sure you've completed the following steps: selmarturbo4batterychargerinstructions link
To connect your charger to a 12V lead-acid battery, follow these steps:
Connect the clamp to the negative (-) terminal or a suitable chassis ground point. : If the ammeter needle does not move
: If the ammeter needle does not move at all when connected, the battery may be "deep discharged" below a voltage the charger can recognize, or it may have a dead cell.
The Selmar Turbo 4 battery charger Go to product viewer dialog for this item. Remove the negative (black) clip first, then the
Once the battery is charged, turn off the charger and disconnect the power cord before removing the alligator clips. Remove the negative (black) clip first, then the positive (red) clip. 4. Maintenance and Troubleshooting
Start on "Medium". Never start on "Boost" with a completely flat battery.
When the charging process is complete, simply disconnect the batteries from the Selmarturbo 4 Battery Charger. The device will automatically return to standby mode.