Mobotix M10 Open Menu Better !!link!! -

Tags: Firewire, 1394

A 1394 Net Adaptor Connection is basically Win2k/XP's way of telling you that you have a Firewire interface installed in your system.

IEEE 1394 is more commonly known as Firewire and is mostly used to connect to peripherals such as digital cameras, camcorders and some external hard drives. It can also be used to network two Firewire-equipped systems together, achieving 12.5 to 50MBps transfer speeds. Firewire networking use is limited because of its 15ft cable length limitation.

User Reviews/Comments:

rate: avg: mobotix m10 open menu better

by chris - 2006-04-13 10:40

I didn't think I could do anything with my 1394 net adaptor, but when I bridged the connection with my lan connection, data transfer is so much faster now.

by frank - 2006-04-26 16:20

How did you bridge the two please?

Frank

by conefor4200 - 2007-04-19 12:39

1.The device manager has a red X on the 1934 net adapter.

2.A bluetooth epox earset is not able to connect.

3.Any connections?

4.Any driver suggestions?

by Venkata Naveen - 2007-08-02 19:32

Right-click on it and select Enable..That should do it.

by anonymous - 2007-09-16 13:26

Why do I have the 1394 Net Adaptor. Its not something I have ever intentionally loaded and seems to REALLY slow my internet interaction? What will be the result if I uninstall it?

by anonymous - 2008-04-29 00:17

Chris,
You don't say how to bridge the firewire and lan connections. Just enabling them on my inspiron 700m does not connect them. My 1394 net adapter is enabled but I cannot get an internet visual from it even though it says that I am connected. My lan connection is enabled and I can access the internet from it but I do not get the higher speed of the 1394 net adaptor. Has anyone been successful at effecting a bridge as Chris infers?

by anonymous - 2008-06-20 22:30

ignore the bridging thing - 1394 is just for plugging in cameras etc as stated & for data transfer between plugin & computer

Mobotix M10 Open Menu Better !!link!! -

There are two ways to get the full menu. The slow way is digging through system settings. The better way takes less than one second.

Do not use the deprecated Mobotix Cloud service for the M10.

: Contains links to image analysis, exposure parameters, event controls, and recording behaviors. mobotix m10 open menu better

Unlike traditional systems that rely on heavy back-end software or centralized servers, the Mobotix M10 is 100% software-driven. This means that the core functionality—including the way users interact with settings—can be upgraded through firmware rather than hardware replacement. This decentralization ensures that the camera remains a "smart" device capable of high-level processing at the edge. Evolution of the Menu Interface

Are you storing video ?

: If the camera is unreachable, it will often announce its IP address through its speaker if you perform a reset. Ensure you are on the same network subnet as the camera for direct browser access.

—a classic decentralized IP camera—is the key to unlocking its full potential. By mastering the "Open Menu" structure, you can move beyond factory defaults to a high-performance, secure setup. 1. Accessing the Web Interface (The "Open Menu") There are two ways to get the full menu

The M10 is configured primarily through a standard web browser. Accessing the Interface: Enter the camera's IP address (default is often ) into your browser's address bar. Logging In: The factory default username is and the default password is Navigating the Layout:

by Bumbershoot - 2013-04-04 08:21

I was having problems with my LAN connection (Logitech squeezebox set up - data stream kept dropping out/connection failing - on and off for YEARS).

Tried "bridging" 1394 and LAN - FIXED!!

Presumably the 1394 and LAN cards were somehow interfering with each other (fighting over resources and confusing the OS?) and now they are in harmony with each other.

Next I'll try disabling the 1394 completely but for now I'm just going to enjoy some music :-)

by Ryan - 2013-04-30 11:05

i have a windows xp desktop and i had a virus on it that wouldnt let me access it. so i used the windows xp professional installation disc to fully recover it and make a clean slate. It suddenly got rid of my local area connection (i have a yellow ethernet cable plugged into the wall) and all it says is i have a 1394 connection. im thinking that windows xp professional installation disc just decides to install it on (1394 network adapter). im not sure how to get rid of it, i could buy a wireless adapter but id rather just connect with an ethernet cord if i can. any suggestions?

by SirDilligaf - 2013-10-27 12:20

To bridge the 1394 connection and the local area connection.
(1) Disable both.
(2) Select both ( drag or use control click just highlight both connections )
(3) right click within the high lighted area and choose bridge connections
that should bridge them.

Popular

Recent