Download the official stock firmware for the . Several websites provide this file. Notable sources include:
Flashing will erase all user data (photos, contacts, apps).
: Once the tool shows a "Passed" or "Success" message, disconnect and reboot the device .
Disconnect the phone and turn it on. The first boot may take 5–10 minutes. Troubleshooting: Hang on Logo Persistence lava benco v90 ae9120 flash file s160 hang logo new
The device starts but gets stuck on the Lava/Benco logo screen. Boot Loop: The phone constantly restarts.
The S160 firmware is specifically tailored to address several common "soft-brick" scenarios:
The "hero" of this story is the (Stock ROM). To fix a Benco V90 AE9120 or stuck on the logo, technicians perform a "Flash". The Resurrection Process: Preparation : The technician downloads the specific Lava Benco V90 AE9120 Download the official stock firmware for the
: Boot the device into Fastboot Mode and connect it to the PC via USB.
Critical boot images (like boot.img , recovery.img , or vendor files) missing or mismatched, throwing the phone into a permanent fastboot loop.
Once the tool detects the device, click Start or Flash . Wait for the "Success" or "Passed" message. : Once the tool shows a "Passed" or
Wait for the tool progress tracking bar to turn green or signal a complete "PASS" or "SUCCESS" notice. Unplug the phone from the USB port.
Approximately 1.5 GB to 2.2 GB (compressed).
If the phone asks for a Google account after flashing, you may need an FRP bypass tool or to use the "Erase FRP" option in the Research Tool settings. Key Point:
Disconnect the phone and power it on. The first boot may take 5–10 minutes.