Hx711 Proteus Library 'link'

Synchronous serial communication via two pins ( SCK , DOUT ). Installing the HX711 Library in Proteus

I can provide the specific schematic diagram and custom code you need.

Since Proteus does not include HX711 by default, you need to download a third-party library. Several versions exist on GitHub, Instructables, and electronics forums. hx711 proteus library

delay(1000);

Practical Recommendations

However, (popular simulation software) does not include an HX711 model by default.

Let's build a simple digital weighing scale. Synchronous serial communication via two pins ( SCK , DOUT )

Paste both files into the LIBRARY folder.

| HX711 Pin | Connected To | |-----------|-------------------------| | VCC | +5V | | GND | GND | | DT (Data) | Arduino Pin 3 | | SCK (Clock)| Arduino Pin 2 | | E+ | +5V (excitation+) | | E- | GND (excitation-) | | A+ | Load cell signal + | | A- | Load cell signal - | Paste both files into the LIBRARY folder

void setup() Serial.begin(9600); scale.begin(3, 2); // DOUT = D3, PD_SCK = D2 scale.set_scale(2280.f); // calibration factor scale.tare(); // reset to zero

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.