Ericsson Mini Link Cli Commands !!hot!! Jun 2026

: Displays the current temperature for each board and high-temperature thresholds. show inventory

Some advanced CLI commands are hidden by default to prevent accidental misconfiguration. To view these, you must enter the cliunlock command in Privileged EXEC mode before using them.

This guide gives a structured, practical, and engaging overview of common Ericsson Mini-Link CLI commands, grouped by task and purpose. It’s written for field engineers, network operators, and anyone who needs fast, actionable CLI help while working on Mini-Link microwave equipment. ericsson mini link cli commands

Exact command syntax may vary slightly depending on MINI-LINK product generation (TN 5.x, 6.x, 7.x, or CN 5000 series). Always refer to the product-specific Ericsson MINI-LINK Operation and Maintenance Guide for your exact software release.

: Enters the global configuration mode for making changes. : Displays the current temperature for each board

The following are some basic CLI commands used in Ericsson Mini Link:

: If you aren't sure of the next parameter, type ? (e.g., show ? ) to see available options for that command. This guide gives a structured, practical, and engaging

Displays current temperature of each board and alarm thresholds Management Performs a "warm restart" on the Traffic Node Sends operator confirmation for class 1 objects Activates an active release or load module Standard CLI copy command for log or config files Configuration Submodes The CLI is organized into specific classes. Use the command followed by the sub-layer to modify settings: Interface Configuration: For physical and logical port settings. Protocol Configuration: For managing routing or communication protocols. Router Configuration: For IP-related routing tasks. LAN-DCN Commands:

Displays the software version, uptime, hardware modules, serial numbers, and part numbers of the chassis and plug-in units. Microwave Link Status show link show radio-link Use code with caution.

Before modifying traffic parameters, verify the health of the indoor unit (AMM - Access Magazine Medium) and outdoor unit (RAU - Radio Unit or MINI-LINK 6363). Inventory and Hardware Status

To begin, establish a connection via Telnet or SSH (default password is often