: Use your stud finder to locate two adjacent wood studs. Mark the center of each stud. Hold the wall plate at your desired height, use the bubble level to ensure it is straight, and mark the pilot hole locations directly over the stud centers. Drill your pilot holes 2.5 inches deep using a 3/16" drill bit.
Hold the wall plate against the brick or concrete wall, level it, and mark four corner installation holes. : Use your stud finder to locate two adjacent wood studs
More pronounced angle for higher wall placements. Dimensions: Approximately Installation Instructions Drill your pilot holes 2
: Check your specific box variant; heavy-duty rails typically support up to 75 kg (165 lbs) . : Use your stud finder to locate two adjacent wood studs
Electric drill and drill bits (3/16" for wood studs, 3/8" for concrete anchors) Phillips-head screwdriver Socket wrench set Measuring tape and pencil Step-by-Step Installation Instructions
Handles TVs from 32” up to 100”.
Installing a mount for a large TV requires at least two people to ensure safety.