Equatech Universal Tv Wall Mount 32 To 100 Instructions -

Thread the selected bolts through the washers, through the brackets, and into the TV. Tighten them firmly using a manual Phillips screwdriver. 3. Mounting the Wall Plate

Connect the arm to the wall plate and TV plate. Adjust the arm to your desired viewing angle.

Use your level again to ensure the plate is perfectly horizontal before fully tightening the bolts. Step 4: Hang the TV equatech universal tv wall mount 32 to 100 instructions

Now that your TV is safely on the wall, you can optimize your viewing angle.

Would you like help identifying your specific Equatech mount based on its physical features (e.g., number of arms, tilt mechanism)? Thread the selected bolts through the washers, through

Unbox your Equatech mount package and verify you have the primary components:

Master Your Movie Nights: Installing the Equatech Universal TV Wall Mount Mounting the Wall Plate Connect the arm to

Hook the top lip of the vertical TV brackets securely over the top rail of the installed wall plate.

Now that you have everything ready, let's get started. Here is a step-by-step guide, using the specifications of the Equatech mount.

Tighten the screws firmly, but do not over-tighten, as this could damage the internal components of the TV. Step 2: Locate Studs and Mark the Wall

Hold the Equatech wall plate up to the wall at your chosen height. Align the mounting slots with your center stud marks.