It will transition to a rapid flashing sequence, confirming that the firmware is rewriting the flash storage.
Verify your panel details. Locate and flash an alternative firmware profile matching your exact resolution (
It looks like you’re asking about for a device identified as Ds.v56rj.bk — possibly a typo or an internal/custom device code. Ds.v56rj.bk Firmware
[Power Disconnected] ➔ [Insert USB Drive] ➔ [Connect Keyboard/IR] ➔ [Apply 12V Power] ➔ [Monitor Indicator LED]
The IR indicator LED will begin to , signaling that it is reading the binary code. It will transition to a rapid flashing sequence,
Access the factory configuration menu to alter the LVDS data map manually. Wrong panel operating voltage selected.
Connect the LVDS cable from the board to your screen. Connect the backlight inverter module and the IR sensor/button keypad. Plug the prepared USB drive into the USB port of the board. [Power Disconnected] ➔ [Insert USB Drive] ➔ [Connect
Format the drive to the file system. A full format is recommended over a quick format to wipe out hidden partitions.