If you simply want the speakers to stay permanently turned "On" at maximum volume (allowing you to control the volume purely via Windows, Mac, or your phone), you can splice the wire:
Gently peel back the rubber anti-slip pad on the bottom of the volume pod to reveal the hidden screws.
🛒
With the grille removed, locate the volume control potentiometer. It's usually located on the main circuit board, near the front of the T3. The volume control is a small, usually blue or black, potentiometer with three pins.
remote are thin. Pulling on them can cause disconnection at the PCB level. creative gigaworks t3 volume control replacement work
(conditioned audio from the pod back to the sub) Ground (GND)
Unplug the T3 system entirely from the wall. If you simply want the speakers to stay
Best for posting on forums (like Creative Labs support or AV forums) or sharing with a friend.
: Unplug the speakers and the control cable from the subwoofer. Pull the large volume knob upward firmly to break the glue securing it. Remove Fasteners The volume control is a small, usually blue
Reattach the circuit board back into the plastic base. Reassemble Housing: Screw the case back together. Replace the Knob: Reattach the top volume knob.