Asr1000-rommon.173-1r.spa.pkg [top] Instant

Move the asr1000-rommon.173-1r.spa.pkg file to the router using a secure protocol like SCP or TFTP.

Look for the Slot column containing RP0 or RP1 . Check the firmware version listed under the Firmware Version column to determine your current baseline. Pre-Upgrade Prerequisites

– upgrade for security and boot stability. asr1000-rommon.173-1r.spa.pkg

Router# upgrade rom-monitor filename bootflash:asr1000-rommon.173-1r.spa.pkg all Use code with caution.

Newer software releases often rely on upgraded hardware initialization routines that only a newer ROMMON can provide. Move the asr1000-rommon

Identify the current version running on your Route Processor slots. If it is older than 17.3(1r), an upgrade is highly recommended. 2. Verify Storage Space

Once the operating system loads, re-verify your boot system variables using show bootvar and set them correctly in the configuration mode. Dual RP Out-of-Sync Errors Pre-Upgrade Prerequisites – upgrade for security and boot

ASR1000-RP2 and ASR1000-RP3 modules installed in modular chassis (ASR 1004, ASR 1006, ASR 1006-X, ASR 1009-X, and ASR 1013). Step-by-Step Upgrade Guide

You don’t update ROMMON for fun. Do it when:

: On ASR1002 RP2 modules with VID >= V07, MD5 signature mismatches have been reported during the upgrade process. Summary of Attributes Product Series Cisco ASR 1000 Series Component Type ROM Monitor (ROMmon) Version File Extension .pkg (Package file) Primary Use Case Prerequisite for IOS XE 17.x software upgrades