Acer Q65h2-am V1.1 | Manual |link|

The Q65H2-AM supports Dual-Channel memory architecture.

Because this is an OEM (Original Equipment Manufacturer) board, a traditional "retail" manual with pinout diagrams and BIOS tuning guides does not exist for the general public. Instead, support is fragmented into the User Manuals for the specific computer cases they inhabit.

Intel LGA 1155 (Supports 2nd Gen Sandy Bridge and 3rd Gen Ivy Bridge processors, though 2nd Gen is most stable). Chipset: Intel Q65 Express (Cougar Point). Form Factor: Micro-ATX ( acer q65h2-am v1.1 manual

This section addresses some of the most frequently encountered problems:

This board is often considered "legacy." Acer typically provides support files through their official support portal by entering the PC's Serial Number or SNID. CPU Compatibility: The Q65H2-AM supports Dual-Channel memory architecture

If you are assembling a new system using this motherboard or transferring it to a new case, use the following guidelines: 1. Processor Installation

6x USB 2.0 ports on the rear (plus 3 internal headers for up to 6 more). Intel LGA 1155 (Supports 2nd Gen Sandy Bridge

the computer entirely and unplug the AC power cable. Locate the CLR_CMOS jumper near the motherboard battery.

5 x SATA II 3.0Gb/s connectors (Note: Usually lacks SATA III 6Gb/s, depending on sub-revision). Networking: Integrated Intel Gigabit LAN. Audio: Realtek High Definition Audio. Form Factor: Micro-ATX (244mm × 244mm). 2. Rear Panel I/O and Internal Connectors

Interestingly, some revisions of this hardware were flagged or recalled in certain markets due to minor defects or overheating risks. If you are reviving an old Veriton, a thorough physical inspection of the PCB tracks and capacitors is highly recommended before powering it on for the first time in years.